PA Series
Strain Clamps
For termination of insulated overhead bundled cables. Broad cable range from 4 x 25 to 4 x 150.
Spring loaded wedges for easier cable insertion.
Product Range
Product Number | Description | Cable Size & Configuration (mm²) | Max Failing Load (kN) |
PA2535 | Strain clamp with aluminium arm – to suit 2 x 25 to 4 x 35 LVABC XLPE 2, 3 & 4 core (use blanking for non used cores). Designed for long spans over roads, dams, driveways, rail or high wind areas | 2, 3 or 4 core XLPE insulated 25 to 35 | 11 |
PA10/1 | Strain clamp with aluminium arm – to suit 4 x 25, 4 x 50 with humpback splitpin | 2, 3 & 4 core XLPE insulated 25 to 50 | 35.75 |
PA10/1S | Strain clamp with aluminium arm – to suit 4 x 25, 4 x 50 with S/S hardware + humpback splitpin | 2, 3 & 4 core XLPE insulated 25 to 50 | 35.75 |
PA11/1 | Strain clamp with aluminium arm – to suit 4 x 50, 4 x 95 with humpback splitpin | 2, 3 & 4 core XLPE insulated 50 to 95 | 44 |
PA11/1S | Strain clamp with aluminium arm – to suit 4 x 50, 4 x 95 with S/S hardware + humpback splitpin | 2, 3 & 4 core XLPE insulated 50 to 95 | 44 |
PA11/1SR | Strain clamp with aluminium arm – to suit 4 x 50, 4 x 95 with S/S hardware bolts enter from oposing sides with SS “R” clip | 2, 3 & 4 core XLPE insulated 50 to 95 | 44 |
PA11/1SRER | Strain clamp with aluminium arm – to suit 4 x 50, 4 x 95 with S/S hardware bolts enter from oposing sides with SS “R” clip | 2, 3 & 4 core XLPE insulated 50 to 95 | 44 |
PA122A | Strain clamp with galvanised steel arm – to suit 4 x 95 to 150 sqmm with S/S hardware bolts | 2, 3 or 4 core XLPE insulated 95 to 150 | 54 |
Features
Applications
Additional Information
Features
• Bolted full tension clamp
• Meets requirements of AS 3766
• Removable pin for easy installation
• Range taking
Applications
Additional Information
Use fillers if only 2 or 3 cores are utilised