Mecha Splice Series
Mechanical Tension Repair Splice
Provides an alternative method for mid-span jointing to overcome common installation issues involved with other types of joints.
Suitable for low and medium voltage – AAC, AAAC, and ACSR distribution conductors.
Product Range
| Product Number | Conductor Range | Cable Range | Configuration | Rating | Current Rating |
| MTRS06-11 | 6 to 11.3mm | 6mm – 11.3mm dia. AAC/AAAC/ACSR 6/1 galv clad steel | 2 x 4 shear bolts 55/75 Nm | 23 kN | 420 A |
| MTRS06-11-EHT | 6 to 11.3mm | 7.5mm ACSR RAISIN Suit AAC/AAAC/ACSR in Range 6-11mmØ | 2 x 6 shear bolts 55/75 Nm | 25 kN | 420 A |
| MTRS10-14 | 10 to 14.3mm | 10mm – 14.3mm dia. AAC/AAAC/ACSR 6/1 galv clad steel | 2 x 5 shear bolts 60/80 Nm | 31 kN | 570 A |
| MTRS10-14-EHT | 10 to 14.3mm | 14.3mm ACSR CHERRY Suit AAC/AAAC/ACSR in Range 10-14mmØ | 2 x 7 shear bolts 60/80 Nm | 34 kN | 570 A |
| MTRS11-18 | 11 to 18.8mm | 11mm – 18.8mm dia. AAC/AAAC/ACSR 6/1 galv clad steel Limited Tension 55 kN | 2 x 5 shear bolts 90/110 Nm | 44.4 kN Limited Tension | 800 A |
| MTRS17-25 | 17 to 25mm | 17mm – 25mm dia. AAC/AAAC/ACSR Limited Tension 44.4 kN | 2 x 5 shear bolts 90/110 Nm | 44.4 kN Limited Tension | 1100 A |
• Range taking, only 4 sizes to cover 6-25mm OD
• Mechanical shearhead bolts for optimum torque control
• Eliminate compatibility problems matching cable, dies and tooling
• Suitable for joining dissimilar conductors of different diameters (withing each range)
• Faster application on ACSR, no need for separate joining of inner cores
• Viewing and drainage holes for self-cleaning
• No special tooling required, only an impact driver
• Tested to AS/NZS 1154-1, ANSI C 119-1, IEC 6128-4
• EHT versions available for ACSR
• Suitable for slack span applications