Heat-Shrink Tubes
• Power utility approved
• Made from thermally stabilised cross-linked polyoelfin blended with synthetic rubber
• UV resistant and weather-proof
• Coated tubes are lined with a polyamide based hot-melt adhesive
• A range of other sizes are available on request
• Alternative coatings available on request
Product Range
Uncoated Medium Wall | ||
Product Code | Diameter (mm) (Exp/Rec) | Standard Roll Length (m) |
LVHTM20/6-U | 20/6 | 30 |
LVHTM30/10-U | 30/10 | 30 |
LVHTM50/16-U | 50/16 | 25 |
LVHTM60/20-U | 60/20 | 25 |
LVHTM85/25-U | 85/25 | 20 |
Coated Medium Wall | ||
Product Code | Diameter (mm) (Exp/Rec) | Standard Cut Length (mm) |
LVHTM20/6-C-1000 | 20/6 | 1,000 |
LVHTM30/10-C-1000 | 30/10 | 1,000 |
LVHTM40/12-C-1000 | 40/12 | 1,000 |
LVHTM60/20-C-1000 | 60/20 | 1,000 |
LVHTM95/25-C-1000 | 95/25 | 1,000 |
LVHTM115/34-C-1000 | 115/35 | 1,000 |
LVHTM140/42-C-1200 | 140/42 | 1,200 |
Coated Heavy Wall | ||
Product Code | Diameter (mm) (Exp/Rec) | Standard Cut Length (mm) |
LVHTH30/10-C-1000 | 30/10 | 1,000 |
LVHTH30/10-C-1500 | 30/10 | 1,500 |
LVHTH40/12-C-1000 | 40/12 | 1,000 |
LVHTH40/12-C-1500 | 40/12 | 1,500 |
LVHTH50/16-C-1500 | 50/16 | 1,500 |
Exp (expanded): Nominal inside diameter of finger or body as supplied, prior to the application of heat.
Rec (recovered): Nominal minimum inside diameter of finger or body achievable after heat has been applied and product has been fully recovered (shrunk-down).
Features
Applications
Additional Information
Features
• Cross-linked polyolefin
• High shrink ratio
• Polyamide based hot-melt adhesive lined
• UV resistant and weather-proof
• Other sizes, types and lengths available
Applications
Additional Information