Cable End Caps
Glue-lined Cable End Caps for the insulation and sealing over the crutch of multi-core cables. Ideal for break-out of MV multi-core, individually screened MV cables.
• Power utility approved
• Ideal for break-out of MV multi-core, individually screened MV cables
• Made from thermally stabilised cross-linked polyoelfin blended with synthetic rubber
• UV resistant and weather-proof
• A range of other sizes are available on request
• Pressure relief valve-type end caps also available
• Alternative coatings available on request
Product Range
| Product Code | Diameter (mm) (Rec/Exp) | Overall Length (mm) (Exp) |
| LVHEC3/10-C | 3/10 | 35 |
| LVHEC4.5/15 | 4.5/15 | 45 |
| LVHEC6/20-C | 6/20 | 63 |
| LVHEC8.5/25-C | 8.5/25 | 70 |
| LVHEC14.5/40-C | 14.5/40 | 102 |
| LVHEC24/63-C | 24/63 | 118 |
| LVHEC38/78-C | 38/78 | 130 |
| LVHEC57/100-C | 57/100 | 155 |
| LVHEC57/120-C | 57/120 | 155 |
| LVHEC57/145-C | 57/145 | 155 |
Exp (expanded): Nominal inside diameter of finger or body as supplied, prior to the application of heat.
Rec (recovered): Nominal minimum inside diameter of finger or body achievable after heat has been applied and product has been fully recovered (shrunk-down).
• Cross-linked polyolefin
• Polyamide based hot-melt adhesive lined
• UV resistant and weather-proof
• Other sizes and types also available