Break-Out Gloves
Glue-lined Break-out Gloves ideal for break-out of MV multi-core, individually screened MV cables
• Power utility approved
• For the insulation and sealing over the crutch of multi-core cables
• Ideal for break-out of MV multi-core, individually screened MV cables
• Made from thermally stabilised cross-linked polyoelfin blended with synthetic rubber
• UV resistant and weather-proof
• The fingers and body are coated with a polyamide based hot-melt adhesive
• A range of other sizes are available on request
• Alternative coatings available on request
Product Range
Product Code | Fingers | Crutch Diameter (mm) (Exp/Rec) | Fingers Diameter (mm) (Exp/Rec) |
LVH2B60/22-C | 2 | 60/22 | 24/6.7 |
LVH3B45/14-C | 3 | 45/14 | 15/4 |
LVH3B60/22-C | 3 | 60/22 | 26/8 |
LVH3B80/33-C | 3 | 80/33 | 36/16 |
LVH3B110/33-C | 3 | 110/33 | 40/16 |
LVH3B125/47-C | 3 | 125/47 | 55/20 |
LVH3B155/54-C | 3 | 155/54 | 62/27 |
LVH3B140/54-C | 3 | 140/54 | 62/27 |
LVH4B38/14-C | 4 | 38/14 | 15/3.2 |
LVH4B50/14-C | 4 | 50/14 | 15/3.2 |
LVH4B100/33-C | 4 | 100/33 | 35/14 |
Exp (expanded): Nominal inside diameter of finger or body as supplied, prior to the application of heat.
Rec (recovered): Nominal minimum inside diameter of finger or body achievable after heat has been applied and product has been fully recovered (shrunk-down).
• Cross-linked polyolefin
• Polyamide based hot-melt adhesive lined
• UV resistant and weather-proof
• Other sizes and types also available